利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…     

NAK-12树脂脱除蚕蛹复合氨基酸异味及褐变物质的研究

本文研究了用NAK－12吸附树脂脱除蚕蛹复合氨基酸异味及褐变色素的条件，初步分析了蚕蛹复合氨基酸异味产生的原因，实验结果表明：当流速为3BV／h时，1ml NAK-12吸附树脂能吸附1．75g蚕蛹复合氨基酸中的异味物质；能吸附1．45g蚕蛹复合氨基酸中的褐变物质。甲醇是异味物质和褐变物质的良好洗脱剂，用pH1．0的甲醇以1BV／h流速洗脱，仅用3．5BV的洗脱剂即可完全洗脱异味物质和褐变物质，蚕蛹复合氨基酸异味产生的可能机理是：加热蚕蛹复合氨基酸液时，其苯丙氨酸，蛋氨酸，蛋氨酸，异亮氨酸，亮氨酸，苏氨酸被氧化脱氨，生成挥发性醛，而其褐变则是赖氨酸，精氨酸与还原糖发生Maillard反应生成褐变物质引起的。     

Optimized Separation of Nine Xanthones by Microemulsion Electrokinetic Chromatography

A microemulsion electrokinetic chromatography method has been firstly used for the separation of the therapeutically important xanthones from Securidaca inappendiculata. The separation of the nine xanthones was systematically optimized with respect to pH, composition of microemulsion,addition of cyclodextrins, applied voltage and column temperature. Baseline separation was successfully achieved for the nine xanthones, which was also compared with that by micellar electrokinetic chromtography.     

A Novel Octahedral Hexasilver(I) Cluster: Ag_6[SSCN(n-C_4H_9)_2]_6

ＣｏｍｐｏｕｎｄｓｆｏｒｍｅｄｆｒｏｍＣｕ ,ＡｇａｎｄＡｕｗｉｔｈｄｉｔｈｉｏ ｌａｔｅｌｉｇａｎｄｓ ,ｓｕｃｈａｓｔｈｅｄｉａｌｋｙｌｄｉｔｈｉｏｃａｒｂａｍａｔｅ (ＤＴＣ) ,ｍｅｒｃａｐｔｏｔｈｉａｚｏｌｉｎｅ (ＨＭＴ)ａｎｄｄｉａｌｋｙｌｄｉｔｈｉｏｐｈｏｓｐｈａｔｅｓ(ＤＤＰ) ,ｈａｖｅｐｌａｙｅｄａｎｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｔｅｃｈｎｏｌｏｇｙ .1Ｃｕ(Ｉ) Ｓｃｌｕｓｔｅｒｓａｌｓｏｈａｖｅｂｅｅｎｉｍｐｌｉｃａｔｅｄｉｎｂｉｏｌｏｇｙａｓａｎ ｔｉ ｏｘｉｄａｎｔｓ .2Ｔｈｅｃｕｂａｎ…     

Nickel-promoted ligand-free palladium-catalyzed Suzuki coupling reaction

Summary A Ni-promoted ligand free palladium catalyst system for Suzuki coupling of aryl bromides has been developed in high efficiency under mild reaction conditions. It was obtained in situ by introducing NiCl₂ to PdCl₂/PVP using a parallel high-throughput screening technique. A wide range of aryl bromides bearing a variety of functional groups was evaluated.     

Solution-phase synthesis and electrochemical hydrogen storage of ultra-long single-crystal selenium submicrotubes

Ultra-long single-crystalline trigonal selenium submicrotubes were synthesized using a facile one-step solution-phase approach with the assistance of nonionic surfactant Polyoxyethylene(20)sorbitan monolaurate (Tween-20), which turned out to be significant for the formation of ultra-long Se submicrotubes. XRD, Raman, SEM, and TEM were adopted to characterize the morphology, structure and phase composition of the as-prepared Se products. It was found that the length of the obtained Se submicrotubes was over 100 microm. By variation of the experimental parameters, the t-Se spheres, nanowires, and broken microtubes can be prepared. The possible growth mechanism of the ultra-long selenium submicrotubes was explained. In addition, we have also demonstrated that the synthesized ultra-long t-Se submicrotubes using the Tween-20-assisted approach can electrochemically charge and discharge with the high capacity of 265 mAh/g (corresponding to 0.97 wt % hydrogen in SWNTs) under normal atmosphere at room temperature. Cyclic voltammetry was adopted to investigate the adsorption-oxidation behavior of ultra-long selenium submicrotubes. It was observed that the morphology of the synthesized selenium products had a remarkable influence on their capacity of electrochemical hydrogen storage. These differences in hydrogen storage capacity are likely due to the size and density of tubes as well as the microcosmic morphology of different Se samples. The as-obtained ultra-long Se submicrotubes are expected to find wide applications in hydrogen storage, high-energy batteries, and optoelectronic, biologic, and catalytic fields as well as in the studies of structure-property relationships. This simple Tween-assisted approach might be extended to the preparations of one-dimensional nanostructures of tellurium and other anisotropic materials.     

Reaction of porous silicon with both end-functionalized organic compounds bearing alpha-bromo and omega-carboxy groups for immobilization of biomolecules

Both end-functionalized (alpha-bromo and omega-carboxy) compounds were first tested for the radical reaction on the silicon-hydride (Si-H) terminated porous silicon (PSi) with/without the presence of diacyl peroxide initiator under microwave irradiation. Then the carboxylic acid monolayers (CAMs) assembled on PSi through the robust Si-C bonds were converted to amino-reactive linker, N-hydroxysuccinimide (NHS)-ester, terminated monolayers. And finally two proteins of bovine serum albumin (BSA) and lysozyme (Lys) were immobilized through amide bonds. The optimum PSi membrane for protein immobilization without collapse, with parameters of porous radii 4-10 nm and depth 0.2-4.6 mum, was prepared from the (100)-oriented p-type silicon wafer. The chemically converted surface products were monitored with Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FESEM).     

Keggin型磷钼杂多蓝的制备新方法——射频氢等离子体固相还原法

将射频等离子体技术应用于杂多蓝的制备中, 成功地制备出四电子还原的磷钼杂多蓝, 并对所制备的杂多蓝进行了结构表征及性质研究, 探讨了磷钼杂多酸在射频氢等离子体中的还原行为.     

IClO2异构化反应机理及电子密度拓扑研究

利用密度泛函理论方法研究了IClO2异构化反应机理. 优化得到了七种异构体, 其中OIClO和IClOO还未见报道, 对各异构体的热力学稳定性进行了比较. 找到了异构化过程的过渡态, 并通过内禀反应坐标(IRC)计算确认了各个异构体之间的相互转化关系. 从量子拓扑学的角度, 对典型异构化反应通道IRC途径上的各点进行了电子密度拓扑分析, 讨论了反应过程中化学键的断裂、生成以及化学键的变化规律, 找到了反应途径上的能量过渡态(ETS)和结构过渡态(STS).     

Nation-Teflon bimembrane-supported palladium catalysts for Suzuki coupling reactions

Nation-Teflon bimembrane was used as an efficient support for the preparation and application of heterogeneous palladium catalysts.The supported palladium catalysts exhibit high activity and stability in the Suzuki cross-coupling of aryl bromides with arylboronic acids to afford the corresponding biaryls in good to excellent yields,and can be readily recovered and reused several times without significant loss of activity.